- Why should we update the LED lights?
- What kind of LED lights can you choose to update?
- The basic information of the internal lights shines
- Other recommendations for interior car lights
Many new cars have been removed from internal halogen lights and use LED lights as a lighting system.LED lights offer drivers and passengers better visibility with better energy saving potential.
We'll talk about why the update should be done, the different types of internal LED light options, installation and some of the LED videos to the interior here. You can find the information here you are looking for!
Why should we update?LED Lights?
LED lights come withA long service lifeThese traditional lighting options can survive traditional lights between 30,000 and 50,000 hours.
Led lightsLess heat and visible lightThat the original halogen lights. Therefore, they are much more efficient energy than conventional lighting options.
LED offerExcellent lightingWith a surprisingly uniform distribution, the original halogen lights.
When changing LED lamps, the owner can choose from a large number of colors and brightness levels.
Halogenic lamps -can be heated and cause wear on light lights. This is the cause of cracks in the house. LED lights create less heat, which helps ensure a much better safety level if something is ruined.
What kind of LED lights can you choose to update?
The coupling light is the great source of light, which is usually placed in the middle of the upper limit of the car. Experiments a better view of passengers while approaching vehicles and falls and facilitates the location of objects in the car.
- Light map
The card lights were mounted on the roof of the cars in front and wanted to read people at night. There is a light on either side so that the driver or passenger can use their light at any time.
- Internal door
These lights provide lighting so that the driver and passengers enter and leave the vehicle.
- Door light -Malas
The stem lamp is located at the top of the car door and lights the door when the lid is opened.
In addition to the internal general lights mentioned above, there are also glove boxes, toilet mirrors, reading lamps, warehouse lights and other places in the vehicle that can update to LED lights to adapt your car.
The basic information of the LED light lights
There are two basic types of lamps for internal lights.
EU."Keilbase" -Glamps- It has only metal below and looks like the tip of a knife or a few closed scissors. The corresponding lamp is T5, T10, T15.
Ⅱ."FESTON" lamp- The type with silver slaps at both ends. The corresponding onion type is 31 mm, 36 mm and 42 mm
Before buying a new lamp, you should check the type of lamp, which is replaced by checking the Original Halogen Office Owner Owner Owner or Lamp is eliminated.
An easy way to do this is through the auxita lamp!
If you have the room and only want the brightest option, nothing is better than the 24 -H series high performance LED lamps.
12 -V Voltage
Lumen: 240 lm/PC
Dimensions: 1 x 0.47 inches, net weight: 2g/pc.
The flat lamp design facilitates insertion or extraction, no tools are not required. Basis installs them directly. Make all types of installation problems!
If you replace the LED lights for interiors, but the assembly leaves too little room to maneuver, which is difficult to remove or replace the lamp. In these cases, the flat LED lamp is your best option.
12 -V Voltage
Step to replace the LED lamp T10/194
Vehicle Information: Honda Pass
1. Identify where the hinge is located and the plastic eyelashes in its map/dome light.
2. Use the flat head screwdriver or the extraction tool for internal ornaments to insert carefully between the lens and the plastic shape of the map light. It should be carefully deleted to prevent old lenses from breaking during change or theProhibited.
3. When touching the halogen lamp, pay attention to the heat from the halogen lamp and remove an isolated cloth to remove the lamp from the original letter.
4. Reach the replacement LED lamp again.
Try the newly -instead lamp and make sure the lamp can be used correctly.If the lamp does not light up, you will need to take the lamp again and rotate 180 ° and reinstall them (this is with polarity pears).
6. Return the heat plate carefully
7. Replace another LED edge, such as coupling lights and trunk lights in the same way.
Halogen lights against LED lights T10 / 194
If you are a visual apprentice, consult the @dullah Goso video tightly when installing the Honda Pass LED internal ramp!
B. "Festón" lamp
The retractable LED lamp lamp is developed and designed by a team of F&E engineers through TeleskopFeder at the top of the lamp in order to get the size adjustment and reduce the problems of LED light installation!
Tamaño: 39 mm ~ 42 mm/31 mm ~ 36 mm
With extremely low energy consumption of the LED internal light kit, LEDs produce more electricity into light energy and incandescent lamps convert electricity into heat and light energy. The 6K series LED limit works on 2W /PC and2 to 3 times brighter than OEM.
Large voltage: 10-30 V DC, (12 V: 0.17A, Performance: 2W/PC)
Cor: 6000k Xenon White
0.47 inches wide, 1.41 inches in length
Tamaño: 31 mm/36 mm/42 mm
Someone has trouble up to update the interior of the vehicle in LEDs, be it the Luz map!
Width Voltage: 10-24 V DC (12 V: 0.2A, Electricity: 2.5 W/PC)
- Cor: 6000k Xenon White
- 0.63 inches wide, 1.42 inches in length
- Tamaño: 31 mm/36 mm/42 mm
Step to replace the LED party lamp
Vehicle information: BMW E46
1. The exchange of the party LED lamp is similar to the LED LED T10/194 lamp. This example of exchange is interior export with a dismantled plastic set.
Identify where the hinge and the plastic eyelashes are in your light very light.
2. Remove the plastic part with the internal ornament extraction tool and remove it and start deliver it (pay attention to the heat of plastic parts).
3. Push the thermal insulation and use the flat head screwdriver or the internal ornament extraction tool to carefully remove the original squeeze.
4. When installing LED lamps, pay attention to LED LED lamp alignment with one side so that you have the best shine and the best vision.
5. Insert the performance and test the newly -stalled lamp and gently return the heat plate and the lens.
Halogenlichter vs. LED LED LED
Here is a video to install the @tenza Motorsports internal lights! You can see more detailed steps!
Other recommendations for interior car lights
If you want to add LED light strips inside, make your car look directly from the Fast & Furious series.So our interior recommendation should not be lost so that your vehicle brings a new life to your car!
Drive mode: 12V lighter
Product Specification: 2 meters
Product Width: 6 mm
Product Color: Blue / Red
Installation place: central console, door, etc.
Applicable Models: General Models
Using: Environmental Lights, Decorative Vehicles
LED strip images (installation effect
Looking for othersInternal accessoriesFor your car? Buy the button button, the window crank, the car's car organizer, the sun viewer brackets, the foot cover here.